Loading grease into a grease gun can seem like a daunting task, but with the right guidance, it’s an easy process. Here’s a step-by-step guide to help you efficiently load your grease gun and get back to your maintenance tasks.
Materials Needed
Before we begin, let’s gather the necessary materials:
- Gloves
- A piece of cardboard
- A rag
- A new marine grease tube
Wearing gloves will protect your hands from the grease, while the cardboard and rag will aid in cleanliness and easy cleanup.
Step-by-Step Instructions
Follow these steps to load your grease gun:
Step 1: Prepare Your Workspace Put on your gloves and place the piece of cardboard on your workspace. This will catch any drips and make cleanup easier.
Step 2: Open the Grease Gun Unscrew the top of the grease gun and pull out the plunger. This will remove the canister from the pump.
Step 3: Remove the Old Cartridge Take out the old cartridge from the canister. Dispose of it properly.
Step 4: Insert the New Cartridge Replace the old cartridge with a new one. Be sure to remove the plastic cap from the new cartridge and recover any grease inside it. Then, insert the new cartridge into the canister.
Step 5: Reassemble the Grease Gun Screw the canister back into the pump. Make sure it’s secure. Push the plunger back up into its original position.
Step 6: Prime the Pump Give the grease gun a few pumps until the grease starts coming out. This clears out any residue from the previous canister.
Step 7: Check the Grease Once the new grease appears, your grease gun is ready for use. You should see the fresh grease coming out of the nozzle.
Thesandshore.com is a source where the post How to Load Grease into a Grease Gun appeared first.