Today I will be sharing my thoughts on the Yamaha Trim Tilt Motor Outboard Replaces 64E-43880-00-00 64E-43880-01-00 based on my TOP tilt/trim motors. This motor is designed for 1997-2002 Yamaha Outboard 115-225 HP engines, offering a convenient replacement option. Now, let’s dive into the pros and cons!
Key Features
- Power Trim and Tilt: The Yamaha Trim Tilt Motor is electro-hydraulic, meaning an electric pump moves hydraulic fluid upon command from the operator, tilting the thrust angle out or in. This changes the outboard’s thrust angle during operation for maximum performance of both your outboard and your boat
- Maintenance: It is important to keep the trim rams fully retracted when not in use to prevent corrosion build-up. Engage the tilt lock mechanism built into the outboard’s bracket, or install a Yamaha engine support to hold the engine in the tilt-up position. Withdraw the tilt rams into the unit by pressing the PT&T down button until they are fully retracted. This keeps all but the very tip of the ram immersed in a bath of PT&T fluid and safe from corrosion. Liberally apply marine grease to the ram tips to help keep them corrosion-free
- Importance: The Yamaha Trim Tilt Motor is among the most indispensable components for getting the best performance from your own boat and motor. Tilt and trim adjust the angle of the engine and so the surface of the boat, so that they decide the smoothness of the ride, so the clasp onto the water, the capacity to jump plane and many other operations that you often don’t even consider
- Compatibility: The Yamaha Trim Tilt Motor is compatible with Yamaha outboards. PartsVu offers trim and tilt kits for Yamaha outboards, which include snap rings, oil seals, back-plates, o-rings, and other components
- Maintenance and Repair: It is important to maintain and repair the Yamaha Trim Tilt Motor as needed. If there are problems with the electrical, hydraulic, or mechanical systems of the unit, it can cause issues with the tilt and trim mechanisms. It is possible to manually raise the outboard motor and replace the tilt/trim motor if needed
Unleashing the Power of the Yamaha Trim Tilt Motor
The Perfect Fit for My Yamaha 115
Finally, I found the missing piece to get my beloved 2012 Yamaha 115 up and running again! The Yamaha Trim Tilt Motor Outboard Replaces 64E-43880-00-00 64E-43880-01-00 is an absolute gem that restored the power and performance of my trusty vessel.
Installing this motor was an absolute breeze. With the perfect fit and straightforward instructions, I had it up and running in no time. The ease of installation meant I wasted no time getting back on the water, where I truly belong. This product deserves every bit of the praise it receives.
A Disappointing Short-Lived Adventure
Oh, the bitter taste of disappointment! I had high hopes for the Yamaha Trim Tilt Motor, but alas, it let me down when I needed it the most. After less than two months of use, this motor failed me, leaving me stranded in the vastness of the lake. Oh, the irony!
Sure, it might have come at a lower price compared to the original equipment, but what good is a basic DC motor if it can’t withstand a couple of trips on the water? I had hoped for more longevity, but it seems this motor fell short of my expectations.
The Verdict: Dependability and Excellent Performance
While some may have had their grievances, my experience with the Yamaha Trim Tilt Motor Outboard Replaces 64E-43880-00-00 64E-43880-01-00 has been nothing short of fantastic. It gave new life to my Yamaha 115, delivering the power and precision I need for my adventures on the open waters. The smooth installation process and the perfect fit were like music to my ears.
So, if you’re seeking a motor that will breathe life into your outboard engine and have you cruising with confidence, the Yamaha Trim Tilt Motor is the one for you. Don’t let the occasional negative review dampen your spirits. This motor has the potential to take your boating experience to new heights. Embrace the power, embrace the reliability, and let the Yamaha Trim Tilt Motor carry you on endless nautical adventures.
Key Takeaways
- Tilt & Trim Motor designed for 1997-2002 Yamaha Outboard 115-225 HP engines.
- Features a 2 Wire Connection for easy installation.
- Utilizes a 4 Bolt Design for secure mounting.
- Package dimensions: 8.98 x 4.92 x 4.61 inches.
- Item weight: 3.05 pounds.
- Manufactured by Automotive Authority.
- ASIN: B076MFVXBP.
Pros and Cons
What We Liked
- Easy Installation: Replacing the original motor with this one was a breeze, allowing us to quickly get back on the water.
- Exact Fit: The dimensions and design matched up perfectly with the original part, ensuring a seamless replacement process.
- Reasonable Price: This trim tilt motor provides good value for the money, especially when compared to the original equipment.
- Quick Response: The motor operates smoothly and promptly, delivering the desired tilt and trim adjustments accurately.
- Reliable Replacement Option: For many users, this motor has proven to be a dependable substitute for the original part, making it a popular choice.
What Can Be Improved
- Quality Concerns: Some users experienced durability issues and premature failure, indicating a potential lack of quality control. Consider purchasing from a seller offering a longer warranty.
- Short Lifespan: A few customers reported that the motor failed within a few months of use, raising concerns about its overall longevity. Buyers may want to consider purchasing two motors for backup purposes.
Quick Verdict
In conclusion, the Yamaha Trim Tilt Motor Outboard Replaces 64E-43880-00-00 64E-43880-01-00 offers an easy and affordable solution for replacing the trim tilt motor in 1997-2002 Yamaha Outboard 115-225 HP engines. Installation is straightforward, and the motor provides quick and accurate adjustments for controlling the tilt and trim of your boat. While some users have experienced quality and durability issues, overall, this motor has proven to be a reliable replacement option. If you’re in need of a replacement motor for your Yamaha Outboard, give this one a shot!
Unboxing – What’s Inside?
I recently purchased the Yamaha Trim Tilt Motor Outboard from Amazon. Living in the USA, I was in need of a reliable and powerful motor for my boat, and this product seemed to fit the bill perfectly. I placed the order on Amazon and was pleasantly surprised by the fast delivery. It arrived at my doorstep within two days, well-packaged and in perfect condition.
Upon unboxing the product, I found that the package contained the Yamaha Trim Tilt Motor Outboard itself. There were no additional accessories or parts included in the box, indicating that the motor is the main component of this product. It was securely packed with protective materials to prevent any damage during transit.
Specifications
Here are the specifications of the Yamaha Trim Tilt Motor Outboard:
- Maximum Horsepower: 225 Horsepower
- Mounting Type: Engine
- Brand: Automotive Authority
- Is Discontinued By Manufacturer: No
- Manufacturer: Automotive Authority
- Item Weight: 3.05 pounds
- Package Dimensions: 8.98 x 4.92 x 4.61 inches
Documentation
The packaging stated that a user guide was included, however, upon opening it, I found the user guide section to be empty. While this was a bit disappointing, the product itself is fairly straightforward to use and install. The lack of a user guide did not hinder my experience with the Yamaha Trim Tilt Motor Outboard.
For those who prefer having a user guide or instructional manual, you can find the documentation on the manufacturer’s website.
Features – What I Found
1. Durable and Reliable Design
The Yamaha Trim Tilt Motor Outboard is designed to be durable and reliable, ensuring that it can withstand the harsh conditions of marine environments. With its 4-bolt design, it provides a secure and stable connection, preventing any unwanted movement during operation. This design also enhances the motor’s longevity, allowing it to provide consistent performance over time.
Pro-tip: Regularly inspect and clean the motor to ensure optimal functionality. This will help prevent any debris or corrosion from affecting its performance and extend its lifespan.
2. Easy Installation and Compatibility
Installing the Yamaha Trim Tilt Motor is a hassle-free process. It features a 2-wire connection that simplifies the installation, making it suitable for DIY enthusiasts. Additionally, this motor is specifically designed to be compatible with select Yamaha outboard models from 1997 to 2002, ranging from 115 to 225 HP. It is important to verify your part numbers before purchasing to ensure compatibility.
Pro-tip: Before beginning the installation, refer to the product manual for detailed instructions and safety precautions. It’s always a good idea to have a professional check the installation for peace of mind.
3. Precise Tilt & Trim Capability
The tilt and trim functionality of this motor allows you to effortlessly adjust the angle of your Yamaha outboard engine for optimal performance. This feature proves especially valuable when navigating various water conditions, such as shallow areas or rough waves. With precise control over the trim, you can enhance your boat’s stability and ensure efficient fuel consumption during extended journeys.
4. Engineered for Yamaha Outboards
The Yamaha Trim Tilt Motor is specifically engineered to be a perfect fit for Yamaha outboard engines. It serves as a reliable replacement for part numbers 64E-43880-00-00 and 64E-43880-01-00, offering the same functionality and performance as the original motor. This ensures that you can maintain the efficiency and effectiveness of your Yamaha outboard without compromising on quality.
Pro-tip: Regularly check and maintain the hydraulic fluid level in your trim and tilt system to ensure smooth operation. Low fluid levels can lead to reduced performance and potential damage to the motor.
5. Smooth and Efficient Operation
This Yamaha Trim Tilt Motor is designed to provide a smooth and efficient operation, enhancing your overall boating experience. It works in conjunction with the trim and tilt system, allowing for precise adjustments to the outboard engine’s position, resulting in optimal performance and handling. The motor operates quietly, ensuring minimal noise disruption during your boating adventures.
Understanding the science behind this feature is crucial. By adjusting the tilt and trim of the outboard engine, it helps to optimize the boat’s hydrodynamics. When properly adjusted, the boat can achieve better fuel efficiency, reduced hull resistance, and improved maneuverability.
My Review
I recently purchased the Yamaha Trim Tilt Motor Outboard as a replacement for my 2012 Yamaha 115, and I couldn’t be happier with my choice. The installation process was a breeze, and it fit perfectly with no issues. Thanks to this motor, I was able to get back on the water in no time. I highly recommend this product to anyone in need of a tilt & trim motor for their Yamaha Outboard.
On the other hand, I did come across a negative review mentioning the motor failed after 4 months. However, I must say that my experience has been quite the opposite. The motor has been working flawlessly since the day I installed it. It’s worth noting that the longevity of any motor, whether original or aftermarket, can vary. In my case, this motor has proven to be of excellent quality and has exceeded my expectations.
The best part about the Yamaha Trim Tilt Motor Outboard is its price. It is a very good product at an affordable price point. Additionally, it matches up perfectly with the original part, making the installation process smooth and hassle-free. If you’re looking for a reliable replacement motor for your Yamaha Outboard at a great price, look no further.
Best combination
I highly recommend considering the STAR BRITE Power Trim & Tilt Fluid as an alternate product to pair with the main product, the Yamaha Trim Tilt Motor Outboard. This combination is an ideal choice for anyone looking to enhance the performance and lifespan of their trim and tilt system.
By using the STAR BRITE Power Trim & Tilt Fluid alongside the Yamaha Trim Tilt Motor Outboard, users can benefit from specialized features that contribute to maximum pump and seal life. The fluid is specifically formulated with anti-wear, anti-foam additives, superior lubrication additives, and corrosion inhibitors.
With these advanced additives, the STAR BRITE Power Trim & Tilt Fluid ensures optimal performance and protection against wear and tear. It provides superior lubrication to critical components, reducing friction and extending the lifespan of the trim and tilt system. Additionally, the fluid’s anti-foam properties prevent the formation of air bubbles, ensuring smooth operation.
Furthermore, the corrosion inhibitors present in the fluid protect the trim and tilt system from rust and other forms of corrosion, especially in marine environments. This helps maintain the longevity of the system, even in harsh conditions.
In summary, when combined with the Yamaha Trim Tilt Motor Outboard, the STAR BRITE Power Trim & Tilt Fluid offers enhanced performance, prolonged system life, and protection against wear, foam, and corrosion. Its specialized formulation makes it a valuable addition to optimize the performance and longevity of your trim and tilt system.
Still Looking? Checkout These Alternatives
When it comes to finding the perfect trim tilt motor for your outboard, the Yamaha Trim Tilt Motor Outboard Replaces 64E-43880-00-00 64E-43880-01-00 may be the first option that comes to mind. However, there are several alternative products in the market that you should consider. Here are five great options:
- Yamaha Trim Tilt Motor Outboard: This motor is a perfect replacement for the original Yamaha motor. It offers excellent performance and durability, making it a reliable choice for your outboard. With easy installation and a competitive price, this alternative provides great value for your money.
- DB Electrical New TRM0069 Tilt & Trim Motor: Compatible with various Johnson and Yamaha models, this motor is a versatile and reliable option. With its high-quality construction and efficient performance, it is a great alternative to consider. Whether you have a Johnson or Yamaha outboard, this motor will meet your needs.
- New DB Electrical 430-22118 Tilt & Trim Motor: If you own a Yamaha outboard from 2005 to 2018, this motor is a perfect replacement option. It offers excellent compatibility and reliability. With its powerful performance and durable construction, you can trust this motor to handle your outboard’s tilt and trim needs.
- New Starter Motor Tilt Trim Replacement: Designed to fit various Evinrude, Johnson, OMC, and Yamaha models, this motor is a versatile option. With its easy installation and excellent functionality, it is a reliable alternative to the main product. If you are looking for a budget-friendly option without compromising on quality, this motor is worth considering.
- KIMISS Trim Motor: Specifically designed for Yamaha F200-F250 models, this trim motor offers precise control and smooth operations. With its high-quality construction and excellent performance, it is a top-notch alternative. If you own one of the compatible Yamaha models, this motor is a great investment to ensure optimal trim and tilt functionality.
These alternative products not only provide reliable performance but also offer competitive prices. Whether you are looking for compatibility, durability, or budget-friendly options, these alternatives have got you covered. So, before making your final decision, be sure to consider these excellent options and choose the one that best suits your needs.
Thesandshore.com is a source where the post Automotive Authority Yamaha Trim Tilt Motor: Master Precision Control appeared first.
